Hustler RAPTOR 42" Zero Turn

Kawasaki FR651V premium and commercial grade V- twin engine

Heavy duty fabricated steel deck: more durable

Fabricated heavy duty steel frame: best in category

SmoothTrak steering

Patented automatic park brake system: built into levers

Heavy duty front caster forks with industrial steel ball bearings

18" drive tyres

11" x 4" front caster tyres

11.36 litres (3 US gal) fuel capacity

10.5 kph (6.5 mph)

Engine guard

Specifications:

• Engine: Kawasaki FR651V
• HP: 21.5 hp (16.0kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995
Standards.)
• Type: Air cooled, 90 degree V-twin, normally aspirated petrol engine.
• Starter: 12-volt
• Ignition: Electronic
• Charging System: 12-volt (see engine manufacturers specifications)
• Oil Filter: Spin-on engine oil filter / Total oil capacity 2.1 litres with filter
• Fuel: Unleaded fuel - maximum of 10% ethanol in fuel (see engine manufacturers
specifications)
• Fuel Capacity: 11.36 L (3 US gal)
• Fuel Filter: Replaceable, automotive-type
• Air Filter: Cartridge air filter
• Cooling: Air cooled. Fly-wheel fan
• Governor: Mechanical
• Drive System: Dual hydrostatic. Hydro-Gear EZT integrated hydrostatic zero turn transaxles.
• Hydrostatic Drive: V-belt drive from engine crankshaft
• Ground Speed - Forward: Infinitely variable 0-10.5 kph (0-6.5 mph)
• Ground Speed - Reverse: 0-6.4 kph (0-4 mph)
• Steering: SmoothTrak twin-lever steering provides independent control of each drive wheel.
Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
• Turning Radius: True zero turning radius. Turns within its own length. Counter-rotating,
independent drive wheels
• Brakes: In Service: Hydrostatic dynamic braking.
Parking: When steering levers are placed in neutral position, integral park brakes are automatically engaged.
• Caster Tyres: 11 x 4.0 - 5, rib tread
• Tyres - Drive: 18 x 8.5 - 8, turf tread
• Weight: 229 kg (505 lbs)
• Seat: Moulded-vinyl seat. Fore and aft adjustment. Seat suspension springs are standard.
• Construction: Mainframe is 3.25" x 1.5" x .120" (8.3 cm x 3.8 cm x .34 cm) channel. Drive motors
mounted to .120" (.45 cm) welded steel. Front caster wheels mounted with commercial duty greasable roller bearings on each wheel. Front caster forks are 1/4" (6.35 mm) steel.
• ROPS: No
• Seat Suspension: Seat suspension springs are standard.
• Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated
parking brakes
• Cup Holder: Cup holder moulded into the left side fender. Accommodates nearly any cup size.
• Height: 39" (990 mm)
• Overall Length: 73" (1854.2 mm)
• Width: 44.42" (1128 mm) w/discharge chute up.
• Width (tyre-to-tyre): 41" (1040 mm)
• Deck System: Side-Discharge: 42" cut. (2) Blades , deck is suspended at two points at the rear
and one in front. Includes deck-mounted anti-scalp wheel(s) to improve flotation in rolling and uneven terrain.
• Cutting Widths: 42" cut Side Discharge
• Deck Lift: Hand-operated deck height adjustment.
• Deck Construction: 11 ga, .120" (3.0 mm) welded steel fabricated deck with 14 ga, .075" (1.9 mm)
reinforced spindle mount areas. Solid 3/4" x 1/4" (19.05 mm x 6.35 mm) steel bars reinforce impact areas on trim edges. Steel deck housing is 4.1" (104.14 mm) deep to provide room for high-capacity mowing.
• Cutting Height(s): Height adjustment in .25" increments from 1.5" to 4.5" (3.81 cm to 11.43 cm, .6 cm
increments)
• Blade(s): (2) Heavy-duty blades. 20.50" x 2.25" x .188"
• Blade Tip Speed: 16,700 fpm
• Blade Drive: V-belt drive to spindles with electric clutch. Spring tension idler pulleys for
extended belt life.
• Spindles: Die cast aluminium housing, 3/4" diameter high carbon steel shafts and sealed
bearings with triple protection seals.
• Discharge Chute: High density, rubberised.
Optional accessories available for purchase separately include: Mulch Kit: HA124448 - Blades included when purchasing this kit. Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces handling of clippings, improves appearance, and recycles nutrients back to the soil. Grass Catcher: HA937441 - 2 bag catcher [non-powered] Hour Meter Kit: HA117703 Arm Rest Kit: HA604436 Extension Arms: HA122760 Light Kit: HA117682
• Please Note: Specifications subject to change without notice.